Guide

Page 4
INTRODUCTION
The LilyMini ProtoSnap is a pre-wired circuit using
a LilyMini, a LilyPad Light Sensor, LilyPad Button, and
two pairs of LilyPad LEDs. The LilyMini comes pre-
programmed with a set of behaviors.
Used in Project 4
Conductive Thread is a specialty thread made with
stainless steel fibers. It can be used instead of copper
wiring to connect LilyPad (or other e-textile) pieces
together to create circuits.
Used in Projects 1, 2, 3, 4
Needles included with this kit were chosen to fit
through LilyPad sew tabs. Two sizes are provided.
Choose the one that works best for you.
Used in Projects 1, 2, 3, 4
Templates with circuit diagrams and labels are
included for each project in this guide.
Used in Projects 1, 2, 3, 4
Felt is a great material to start sewing with because
it is sturdy and won’t fray. Find additional colors and
sizes at your local craft store.
Used in Projects 1, 2, 3, 4
Fiberfill Stuffing is included to add some fluff to the
plush project.
Used in Project 3
Also Included: Embroidery Thread, Elastic Cord, Pin
Back, and Sewing Thread.
LilyMini
ProtoSnap
S
Button
LEDs
Light
Sensor
1
2
+
_
Press to change mode
4
3
on
1
2
3
4