Guide

Page 3
INTRODUCTION
Kit Contents
The LilyPad Coin Cell Battery Holder has space
for a 20mm coin cell battery and four sew tabs (two
positive, two negative). A slide switch turns it on/off.
Used in Projects 1, 2
All the projects in this kit are powered by 3V Coin Cell
(CR2032) Batteries. The top of the battery (marked
with a + sign) is positive, and the bottom is negative.
Used in Projects 1, 2, 3, 4
LilyPad LEDs (Light-Emitting Diodes) have two
sew tabs (one positive, one negative), marked (+) and
(–), which connect to a power source. LEDs come
in a panel and must be snapped apart before using
individual LEDs in projects. The LED’s color is labeled
on the back of each piece.
Used in Projects 1, 2
The LilyPad E-Sewing ProtoSnap is a set of LilyPad
pieces connected together on a single, snappable
board, allowing you to explore the circuit’s function
before you sew it into a project. This ProtoSnap
includes a LilyPad Button connected to a LilyPad LED,
a LilyPad Slide Switch connected to two LilyPad LEDs,
and a LilyPad Coin Cell Battery Holder.
Used in Project 3
OFF
ON
Off On
Protosnap