Guide

Page 60
NIGHT-LIGHT PENNANT
4
Preparing Your Components
Carefully snap the pieces of the ProtoSnap apart. Use a set
of pliers or diagonal cutters if you are having trouble snapping the
pieces apart.
ON
Off On
LilyMini
ProtoSnap
S
Button
LEDs
Light
Sensor
1
4
3
2
+
_
Press to change mode
1
2
3
4
on
CR2032
LITHIUM BATTERY
3V
Discard the non-sewable pieces and scraps. You will end up with seven LilyPad
pieces: the LilyMini with battery, four LilyPad LEDs, a LilyPad Button Board, and a
LilyPad Light Sensor. We will be labeling the LEDs A, B, C, and D in the circuit diagram
to help keep track of them while we stitch the circuit. LEDs A and B will be the first
pair, and LEDs C and D will be the second pair.
LilyPad Light Sensor
LilyMini
LilyPad
Button
LilyPad LEDs