Guide

Page 12
LILYPAD BASICS
Sewing Basics
After sewing loops around a sew tab, a running stitch will
enable you to connect LilyPad pieces together with a continuous
length of conductive thread. Follow these steps:
Push the needle through the fabric about
1/4" in the direction of your stitch path.
Push the needle back up through the fabric
another 1/4" along the stitch path.
Pull the slack of the thread through so it
sits flush with the fabric.
Pull the slack of the thread through so it
sits flush with the fabric.
1.
3.
2.
4.
5.
Repeat this process to
travel along the path to
the next LilyPad piece
you want to connect
to, keeping stitches
evenly spaced.