Data Sheet

Circuit_01
Circuit_02
Circuit_03
Circuit_04
Circuit_05
Circuit_06
Circuit_07
6 : intro
The Arduino IDE
IN ORDER TO GET YOUR
REDBOARD UP AND RUNNING,
you'll need to download the newest
version of the Arduino software
from www.arduino.cc (it's free!).
This software, known as the Arduino
IDE (Integrated Development
Environment), will allow you to program the RedBoard to do exactly what you want.
It’s like a word processor for coding. With an internet-capable computer, open up your
favorite browser and type the following URL into the address bar:
DOWNLOAD THE SOFTWARE HERE:
arduino.cc/downloads
. DOWNLOAD AND INSTALL ARDUINO IDE
Select the installer option appropriate for the operating system you are using. Once
finished downloading, open the file and follow the instructions to install.
. INSTALL USB DRIVERS
In order for the RedBoard hardware to work with your computer’s operating system,
you will need to install a few drivers. Please go to www.sparkfun.com/FTDI for specific
instructions on how to install the USB drivers onto your computer.
. CONNECT THE REDBOARD TO A COMPUTER
Use the USB cable provided in the SIK to connect the RedBoard to one of your computer’s
USB inputs.
SIK v4 Book Oct 13.indb 6 10/18/17 9:58 AM