Data Sheet

DRV2605L

www.ti.com

SLOS854C –MAY 2014–REVISED SEPTEMBER 2014

Device Support (continued)

EFFECT ID EFFECT EFFECT ID

WAVEFORM NAME WAVEFORM NAME WAVEFORM NAME

NO. ID NO> NO.

Transition Ramp Down Short Smooth 2 –

34 Short Double Sharp Tick 1 – 100% 75 116 Transition Ramp Up Short Sharp 1 – 0 to 50%

100 to 0%

Transition Ramp Down Long Sharp 1 – 100

35 Short Double Sharp Tick 2 – 80% 76 117 Transition Ramp Up Short Sharp 2 – 0 to 50%

to 0%

Transition Ramp Down Long Sharp 2 – 100

36 Short Double Sharp Tick 3 – 60% 77 118 Long buzz for programmatic stopping – 100%

to 0%

Long Double Sharp Click Strong 1 – Transition Ramp Down Medium Sharp 1 –

37 78 119 Smooth Hum 1 (No kick or brake pulse) – 50%

100% 100 to 0%

Long Double Sharp Click Strong 2 – Transition Ramp Down Medium Sharp 2 –

38 79 120 Smooth Hum 2 (No kick or brake pulse) – 40%

80% 100 to 0%

Long Double Sharp Click Strong 3 – Transition Ramp Down Short Sharp 1 – 100

39 80 121 Smooth Hum 3 (No kick or brake pulse) – 30%

60% to 0%

Long Double Sharp Click Strong 4 – Transition Ramp Down Short Sharp 2 – 100

40 81 122 Smooth Hum 4 (No kick or brake pulse) – 20%

30% to 0%

Long Double Sharp Click Medium 1 – Transition Ramp Up Long Smooth 1 – 0 to

41 82 123 Smooth Hum 5 (No kick or brake pulse) – 10%

100% 100%

12.2 Trademarks

TouchSense is a registered trademark of Immersion Corporation.

All other trademarks are the property of their respective owners.

12.3 Electrostatic Discharge Caution

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

12.4 Glossary

SLYZ022 — TI Glossary.

This glossary lists and explains terms, acronyms, and definitions.

13 Mechanical, Packaging, and Orderable Information

The following pages include mechanical packaging and orderable information. This information is the most

current data available for the designated devices. This data is subject to change without notice and revision of

this document. For browser-based versions of this data sheet, refer to the left-hand navigation.

Product Folder Links: DRV2605L