Data Sheet

WAV_FRM_SEQ0[7:0]
WAV_FRM_SEQ1[7:0]
WAV_FRM_SEQ2[7:0]
WAV_FRM_SEQ3[7:0]
WAV_FRM_SEQ4[7:0]
WAV_FRM_SEQ5[7:0]
WAV_FRM_SEQ6[7:0]
WAV_FRM_SEQ7[7:0]
Effect 1
Effect 2
Effect 3
Effect 4
Effect 5
Effect 123
GO
ROM LibraryWaveform Sequencer
DRV2605L
SLOS854C –MAY 2014–REVISED SEPTEMBER 2014 www.ti.com
Programming (continued)
Figure 29. Waveform Sequencer Programming
8.5.8.2.6 Waveform Triggers
When the waveform sequencer has the effect (or effects) loaded, the waveform sequencer can be triggered by
an internal trigger, external trigger (edge), or external trigger (level). To trigger using the internal trigger set the
MODE[2:0] bit to 0 in register 0x01. To trigger using the external trigger (edge), set the MODE[2:0] bit to 1 and
then follow the trigger instructions listed in the Edge Trigger section. To trigger using the external trigger (level),
set the MODE[2:0] bit to 2 and then follow the trigger instructions listed in the Level Trigger section.
32 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DRV2605L