Product Overview

1/23/2018 ESP32 Environment Sensor Shield Hookup Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/esp32-environment-sensor-shield-hookup-guide?_ga=2.200929641.659504291.1516640116-204410570.150963…
12/17
Go ahead and solder all the pins to the ESP32 Thing at this time.
If you're new to soldering, check out our through-hole soldering tutorial. We'll wait here.
If you’re new to soldering, you may want to solder just the first and last position on each side, then pull the board free of the
breadboard, to avoid heat damage to your breadboard. You may find it easier to remove the board from the breadboard by
inserting a flat-edge screwdriver under the end of the ESP32 and gently levering the board away from the breadboard by turning
the handle of the screwdriver.