Product Overview

1/23/2018 ESP32 Environment Sensor Shield Hookup Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/esp32-environment-sensor-shield-hookup-guide?_ga=2.200929641.659504291.1516640116-204410570.150963…
10/17
For the female headers, however, things are a little trickier. In order to trim to the appropriate length, you’ll lose one pin since these
come in 40-position pieces as well. That means you’ll need to order two of these in order to get two 20-position pieces, and you’ll
have two 19-position pieces left over. Bummer, I know.
The best way to trim the female header pieces is to count out 20 pins, pull the 21st pin, then use a side cutter to cut the gap
between the 20th and 22nd pin.
You must be careful when cutting the header to center your snip. An off center cut may result in the mechanical portion of the
header escaping or losing some of its retention force.