Data Sheet

16
UNITS IN A SEALED
MOISTURE-PROOF PACKAGE
ENVIRONMENT
LESS THAN 30°C
AND LESS THAN
60% RH
PACKAGE IS OPENED
(UNSEALED)
PACKAGE IS
OPENED LESS
THAN 168 HOURS
NO BAKING IS
NECESSARY
PERFORM RECOMMENDED
BAKING CONDITIONS
YES
YES
NO
NO
BAKING CONDITIONS CHART
Moisture Proof Packaging Chart
All APDS-9301 options are shipped in moisture proof package. Once opened, moisture absorption begins.
This part is compliant to JEDEC Level 3.
Recommended Storage Conditions
Storage Temperature 10°C to 30°C
Relative Humidity Below 60% RH
Time from Unsealing to Soldering
After removal from the bag, the parts should be soldered
within seven days if stored at the recommended storage
conditions. When MBB (Moisture Barrier Bag) is opened
and the parts are exposed to the recommended storage
conditions more than seven days the parts must be baked
before reflow to prevent damage to the parts.
Baking Conditions
If the parts are not stored per the recommended storage
conditions they must be baked before reflow to prevent
damage to the parts.
Package Temp. Time
In Reels 60°C 48 hours
In Bulk 100°C 4 hours
Note: Baking should only be done once.