Data Sheet

DocID025715 Rev 2 55/72
LSM9DS1 Accelerometer and gyroscope register description
72
7.30 STATUS_REG (27h)
Status register.
Table 79. INT_GEN_SRC_XL register description
IA_XL
Interrupt active. Default value: 0.
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
ZH_XL
Accelerometer’s Z high event. Default value: 0
(0: no interrupt, 1: Z high event has occurred)
ZL_XL
Accelerometer’s Z low event. Default value: 0
(0: no interrupt; 1: Z low event has occurred)
YH_XL
Accelerometer’s Y high event. Default value: 0
(0: no interrupt, 1: Y high event has occurred)
YL_XL
Accelerometer’s Y low event. Default value: 0
(0: no interrupt, 1: Y low event has occurred)
XH_XL
Accelerometer’s X high event. Default value: 0
(0: no interrupt, 1: X high event has occurred)
XL_XL
Accelerometer’s X low. event. Default value: 0
(0: no interrupt, 1: X low event has occurred)
Table 80. STATUS_REG register
0 IG_XL IG_G INACT
BOOT_
STATUS
TDA GDA XLDA
Table 81. STATUS_REG register description
IG_XL Accelerometer interrupt output signal. Default value: 0
(0: no interrupt has been generated; 1: one or more interrupt events have been gener-
ated)
IG_G Gyroscope interrupt output signal. Default value: 0
(0: no interrupt has been generated; 1: one or more interrupt events have been gener-
ated)
INACT Inactivity interrupt output signal. Default value: 0
(0: no interrupt has been generated; 1: one or more interrupt events have been gener-
ated)
BOOT_
STATUS
Boot running flag signal. Default value: 0
(0: no boot running; 1: boot running)
TDA Temperature sensor new data available. Default value: 0
(0: a new data is not yet available; 1: a new data is available)
GDA Gyroscope new data available. Default value: 0
(0: a new set of data is not yet available; 1: a new set of data is available)
XLDA Accelerometer new data available. Default value: 0
(0: a new set of data is not yet available; 1: a new set of data is available)