Design Guide

ThingMagic Nano Carrier Board
A DIVISION OF TRIMBLE
Hardware Integration 53
ThingMagic Nano Carrier Board
ThingMagic has created a Carrier Board for the ThingMagic Nano module, as an example
of a host board for this module and to create an assembly that is compatible with the
standard Development Kit main board. It has the size and dimensions of the M6e module
(69 mm x 43 mm), and uses the same connector for power and control (Molex 53261-
1571 - 1.25mm pin centers, 1 amp per pin rating. which mates with Molex housing p/n
51021-1500 with crimps p/n 63811-0300).
The pin definitions are the same as for the M6e module, for the functions that are
supported by the ThingMagic Nano module, with one exception: The “SHUTDOWN” line