Datasheet

13.2.3 FSM_START_ADD_L (7Eh) and FSM_START_ADD_H (7Fh)
FSM start address register (r/w). First available address is 0x033C.
Table 311. FSM_START_ADD_L register
FSM_
START7
FSM_
START6
FSM_
START5
FSM_
START4
FSM_
START3
FSM_
START2
FSM_
START1
FSM_
START0
Table 312. FSM_START_ADD_L register description
FSM_START[7:0] FSM start address value (LSbyte). Default value: 00000000
Table 313. FSM_START_ADD_H register
FSM_
START15
FSM_
START14
FSM_
START13
FSM_
START12
FSM_
START11
FSM_
START10
FSM_
START9
FSM_
START8
Table 314. FSM_START_ADD_H register description
FSM_START[15:8] FSM start address value (MSbyte). Default value: 00000000
13.2.4 PEDO_CMD_REG (83h)
Pedometer configuration register (r/w)
Table 315. PEDO_CMD_REG register
0
(1)
0
(1)
0
(1)
0
(1)
CARRY_
COUNT_EN
FP_
REJECTION_
EN
0
(1)
AD_
DET_EN
1. This bit must be set to '0' for the correct operation of the device.
Table 316. PEDO_CMD_REG register description
CARRY_COUNT_EN Set when user wants to generate interrupt only on count overflow event.
FP_REJECTION_EN
(1)
Enables the false-positive rejection feature.
AD_DET_EN
(2)
Enables the advanced detection feature.
1. This bit is effective if the PEDO_ADV_EN bit of EMB_FUNC_EN_B (05h) is set to 1.
2. This bit is effective if both the FP_REJECTION_EN bit in PEDO_CMD_REG (83h) register and the PEDO_ADV_EN bit of
EMB_FUNC_EN_B (05h) are set to 1.
LSM6DSO
Page 1 - Embedded advanced features registers
DS12140 - Rev 2
page 134/172