Datasheet

11.39 EMB_FUNC_SRC (64h)
Embedded function source register (r/w)
Table 253. EMB_FUNC_SRC register
PEDO_RST
_STEP
0
STEP_
DETECTED
STEP_
COUNT_
DELTA_IA
STEP_
OVERFLOW
STEPCOUNT
ER_BIT_SET
0 0
Table 254. EMB_FUNC_SRC register description
PEDO_RST_STEP
Reset pedometer step counter. Read/write bit.
(0: disabled; 1: enabled)
STEP_DETECTED
Step detector event detection status. Read-only bit.
(0: step detection event not detected; 1: step detection event detected)
STEP_COUNT_DELTA_IA
Pedometer step recognition on delta time status. Read-only bit.
(0: no step recognized during delta time;
1: at least one step recognized during delta time)
STEP_OVERFLOW
Step counter overflow status. Read-only bit.
(0: step counter value < 2
16
; 1: step counter value reached 2
16
)
STEPCOUNTER_BIT_SET
This bit is equal to 1 when the step count is increased. If a timer period is programmed in
PEDO_SC_DELTAT_L (D0h) & PEDO_SC_DELTAT_H (D1h) embedded advanced features
(page 1) registers, this bit is kept to 0.
Read-only bit.
11.40 EMB_FUNC_INIT_A (66h)
Embedded functions initialization register (r/w)
Table 255. EMB_FUNC_INIT_A register
0
(1)
0
(1)
SIG_MOT
_INIT
TILT
_INIT
STEP_DET
_INIT
0
(1)
0
(1)
0
(1)
1. This bit must be set to '0' for the correct operation of the device.
Table 256. EMB_FUNC_INIT_A register description
SIG_MOT_INIT Significant motion detection algorithm initialization request. Default value: 0
TILT_INIT Tilt algorithm initialization request. Default value: 0
STEP_DET_INIT
Pedometer step counter/detector algorithm initialization request.
Default value: 0
LSM6DSO
EMB_FUNC_SRC (64h)
DS12140 - Rev 2
page 122/172