Datasheet

Bosch Sensortec | BME680 Datasheet
22 | 50
Modifications reserved |Data subject not change without notice | Printed in Germany
Document number: BST-BME680-DS001-00 Revision_1.0_072017
Table 14: BSEC outputs
Output
Included in
solution
Description
IAQ
ALL
Raw pressure
✔
✔
Raw data from sensor API bypassed to BSEC output
Raw temperature
✔
✔
Raw data from sensor API bypassed to BSEC output
Raw relative humidity
✔
✔
Raw data from sensor API bypassed to BSEC output
Raw gas resistance
✔
✔
Raw data from sensor API bypassed to BSEC output
Sensor-compensated
temperature
✔
✔
Temperature which is compensated for internal cross-
influences caused by the BME sensor
Sensor-compensated relative
humidity
✔
✔
Relative humidity which is compensated for internal cross-
influences caused by the BME sensor
Ambient temperature
✔
Ambient temperature after compensating the influence of
device (where BME680 is integrated in) heatsources
Ambient relative humidity
✔
Ambient relative humidity after compensating influence of
device (where BME680 is integrated in) heatsources
IAQ (0-500)
✔
✔
Indoor-air-quality
Accuracy status
✔
✔
Accuracy status of IAQ, ambient termpature/humidity
Stabilization time status
✔
✔
Indicates if the sensor is undergoing initial stabilization during
its first use after production
Run in status
✔
✔
Indicates when the sensor is ready after after switch-on