Data Sheet

ManualsBrandsSparkfun Electronics ManualsInertia Measurement UnitsSparkFun ICM-20948 9DoF IMU Breakout (Qwiic)

ICM-20948

Document Number: DS-000189 Page 89 of 89

Revision: 1.3

COMPLIANCE DECLARATION DISCLAIMER

InvenSense believes the environmental and other compliance information given in this document to be correct but

cannot guarantee accuracy or completeness. Conformity documents substantiating the specifications and component

characteristics are on file. InvenSense subcontracts manufacturing and the information contained herein is based on

data received from vendors and suppliers, which has not been validated by InvenSense.

This information furnished by InvenSense, Inc. (“InvenSense”) is believed to be accurate and reliable. However, no responsibility is assumed by

InvenSense for its use, or for any infringements of patents or other rights of third parties that may result from its use. Specifications are subject to

change without notice. InvenSense reserves the right to make changes to this product, including its circuits and software, in order to improve its

design and/or performance, without prior notice. InvenSense makes no warranties, neither expressed nor implied, regarding the information and

specifications contained in this document. InvenSense assumes no responsibility for any claims or damages arising from information contained in this

document, or from the use of products and services detailed therein. This includes, but is not limited to, claims or damages based on the infringement

of patents, copyrights, mask work and/or other intellectual property rights.

Certain intellectual property owned by InvenSense and described in this document is patent protected. No license is granted by implication or

otherwise under any patent or patent rights of InvenSense. This publication supersedes and replaces all information previously supplied. Trademarks

that are registered trademarks are the property of their respective companies. InvenSense sensors should not be used or sold in the development,

storage, production or utilization of any conventional or mass-destructive weapons or for any other weapons or life threatening applications, as well

as in any other life critical applications such as medical equipment, transportation, aerospace and nuclear instruments, undersea equipment, power

plant equipment, disaster prevention and crime prevention equipment.

AAR, and the InvenSense logo are trademarks of InvenSense, Inc. The TDK logo is a trademark of TDK Corporation. Other company and product names

may be trademarks of the respective companies with which they are associated.