User Manual

ThingMagic Nano User Guide 59
www.JADAKtech.com
J16
Jump pins 1 and 2 or 2 and 3 to reset development kit power supply. Same as using switch SW1 except
allows for control by external circuit.
J17
Jump pins 1 and 2 to use the 5V INPUT and GND inputs to provide power. Jump pins 2 and 3 to use the
Development Kitʼs DC power jack and power brick power.
J19
The jumper at J19 that connects SHUTDOWN to ground must be REMOVED. With this jumper removed,
the module is always operational. The AUTO_BOOT switch has no effect on the ThingMagic Nano. To put
the ThingMagic Nano into shutdown mode, reinstall the jumper at J19 between SHUTDOWN and GND.
See ThingMagic Nano Digital Connector Signal Definition for details on the ENABLE Line.
Development Kit Schematics
Available upon request from [e-mail].
Demo Application
A demo application which supports multi-protocol reading and writing is provided in the MercuryAPI SDK
package. The executable for this example is included in the MercuryAPI SDK package under /cs/samples/
exe/Universal-Reader-Assistant.exe and is also available for direct download from the website.
NOTE: The Universal Reader Assistant included in the MercuryAPI SDK maybe an older revision than
the one available for standalone download.
See the Readme.txt in /cs/samples/Universal-Reader-Assistant/Universal-ReaderAssistant for usage
details.
See the MercuryAPI Programmers Guide for details on using the MercuryAPI.
Notice on Restricted Use of the Development Kit
The Developers Kit (Dev Kit) is intended for use solely by professional engineers for the purpose of
evaluating the feasibility of applications.
The user’s evaluation must be limited to use within a laboratory setting. This Dev Kit has not been certified
for use by the FCC in accordance with Part 15 of the FCC regulations, ETSI, KCC or any other regulatory
bodies and may not be sold or given for public use.
Distribution and sale of the Dev Kit is intended solely for use in future development of devices which may
be subject to regional regulatory authorities governing radio emission. This Dev Kit may not be resold by
users for any purpose. Accordingly, operation of the Dev Kit in the development of future devices is
deemed within the discretion of the user and the user shall have all responsibility for any compliance with
any regional regulatory authority governing radio emission of such development or use, including without
limitation reducing electrical interference to legally acceptable levels. All products developed by user must
be approved by the appropriate regional regulatory authority governing radio emission prior to marketing or
sale of such products and user bears all responsibility for obtaining the prior appropriate regulatory
approval, or approval as needed from any other authority governing radio emission.