User Manual

ThingMagic Nano User Guide 2
www.JADAKtech.com
2 Hardware Overview
Hardware Interfaces
Module Pin-out
Connections are made to the module using 41 edge pads (“vias”) that allow the module to be surface-
mounted to a main board. Here is a bottom view of the module, showing the numerical interfaces of the
module:
Module Pin-out
The document sections that follow explain in detail how these connections are used.
Antenna Connections
ThingMagic Nano supports one monostatic bidirectional RF antenna through edge vias. See Hardware
Integration for antenna edge via locations and layout guidelines.
The maximum RF power that can be delivered to a 50-ohm load from each port is 0.5 Watts, or +27 dBm
(regulatory requirements permitting).