User Manual

Note: Isolator model is only
a suggestion.
Setup Configurations (Arduino is shown but MyoWare is compatible with most development boards)
a) Battery powered with isolation via no direct external connections
b) Grid powered with USB isolation
Note: Since no component is
connected to electrical grid,
further isolation is not
required. It is also
acceptable to power the
MCU with a battery via the
USB or barrel ports.
EMAIL: [e-mail]
www.AdvancerTechnologies.com
RECOMMENDED
© 2015-2016
(Note: Arduino and batteries not included. Arduino setup is only an example; sensor will work with numerous other devices.)
USB Isolator
(Adafruit 2107)
RECOMMENDED