Datasheet

Note: The Experiment Guide includes full example to code to get your RedBot
functioning and moving as quickly as possible.
Includes:
 1x SparkFun RedBot Mainboard
 1x Shadow Chassis
 1x SparkFun RedBot Sensor - Accelerometer
 2x SparkFun RedBot Sensor - Mechanical Bumper
 3x SparkFun RedBot Sensor - Line Follower
 1x SparkFun RedBot Buzzer
 2x Hobby Gearmotor - 140 RPM
 2x Wheel - 65mm (Rubber Tire)
 1x Wheel Encoder Kit
 5x Jumper Wire - 3-pin, 6"
 1x SparkFun USB Mini-B Cable – 2 m
 1x SparkFun Mini Screwdriver
 4x AA Alkaline Battery - 1500 mAh