Datasheet
1
23456789101
11
2131
4
15
SH CONNECTOR
1.0mm pitch/Disconnectable Crimp style connectors
Emboss Tape
2.9
6.3
10.6
4.2
1.8
0.2
1.20.7
2.65
Header outline
±0.05
±0.05
±0.1 ±0.1
±0.1
±0.1
±0.1
±0.1
6.25
2.95
1
0.6
1.20.7
4
1.8
0.2
5.55
Header outline
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
±0.1
±0.1
0.8
0.5
2
3.9
1.6
0.8
0.45
1.55
1.35
SSH-003T-P0.2-H 0.032〜0.08 32〜28 0.4〜0.8 23,000
Material and Finish
Model No.
Applicable wire
Q'ty/
reelmm
2
AWG#
Insulation O.D. (mm)
Phosphor bronze, tin-plated (reflow treatment)
Contact
Crimping
machine
AP-K2N
MKS-L-10-3
*MKS-SC
MK/SSH/L-003-02
SC/SSH/L-003-02
Applicator
Crimpapplicator Dies
APLMK SSH/L003-02
APLSC SSH/L003-02
Crimpapplicatorwithdies
SSH-003T-P0.2-H
The world's first 1.0mm pitch crimp style
connector.
• Compact, low profile design
• Compatible with the SR insulation
displacement connectors
• Housing lances
Specifications –––––––––––––––––––
• Current rating: 1.0 A AC, DC (AWG #28)
• Voltage rating: 50 V AC, DC
• Temperature range:
-25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 20 mΩ max.
After environmental tests/ 40 mΩ max.
• Insulation resistance: 100 MΩ min.
• Withstanding voltage: 500 VAC/minute
• Applicable wire: Conductor size/ AWG #32 to #28
Insulation O.D./ 0.4 to 0.8 mm
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
* Compliant with RoHS.
Standards ––––––––––––––––––––––
0 Recognized E60389
1
Certified LR20812
Contact
RoHS compliance
Note: Contact JST for gold-plated products.
Note: *Strip-crimp applicator
Contact JST for applicable wires in case that it is not usable due to wire size.
Top entry type Side entry type
PC board layout and Assembly layout
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative:
±
0.05 mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.