Datasheet

Automation HAT Mini

Automate your world with Automation HAT Mini! Monitor and control up to 24V

systems and see their status on the gorgeous full-colour display.

Don't be fooled by its size... Automation HAT Mini packs a whole bunch of functionality

in. It has a relay, 3x buffered inputs 3x outputs, and 3x analog inputs, all 24V-tolerant.

Last but not least, it has a beautiful 0.96" full-colour IPS LCD to display the status of

your systems.

Automation HAT Mini is perfect for home automation projects, giving your greenhouse

intelligent sprinklers, for scheduling your fish feeding, or for controlling low-voltage

lighting systems.

Features

0.96" colour LCD (160x80)

1/3

PAGE 1
Automation HAT Mini Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display. Don't be fooled by its size... Automation HAT Mini packs a whole bunch of functionality in. It has a relay, 3x buffered inputs 3x outputs, and 3x analog inputs, all 24V-tolerant. Last but not least, it has a beautiful 0.96" full-colour IPS LCD to display the status of your systems.
PAGE 2
1 x 24V @ 2A relay (NC and NO terminals) 3 x 12-bit ADC @ 0-24V (ADS1015) (±2% accuracy) 3 x 24V tolerant buffered inputs 3 x 24V tolerant sinking outputs 3.5mm screw terminals Pimoroni breakout-compatible pin header Mini HAT-format board Fully-assembled (no soldering required) Compatible with all 40-pin header Raspberry Pi models Python library Dimensions: 65x30x16.
PAGE 3
Loads for the outputs should be switched on the ground side, i.e. 12/24V (from supply) -> load -> output terminal -> ground (from supply) The relay can tolerate up to 2A each and should be switched on the high side The sinking outputs can sink a maximum 500mA total across the 3 outputs, so if you use a single channel you can sink the whole 500mA across it. The accuracy of the ADC is ±2%.