Data Sheet

1/26/2018 Setting Up the Pi Zero Wireless Pan-Tilt Camera - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/setting-up-the-pi-zero-wireless-pan-tilt-camera?_ga=2.27217844.824006966.1516918290-204410570.150963225…
8/11
Now, find the longest machine screws in the baggie, as shown below. Once again, you’ll find that there are more of
these than you need.
Thread these screws through the stand off wings on the servo motor and into the last piece of the mechanism. You
can use nuts for these if you like, but I’ve found it to be unnecessary as they thread into the mechanism quite snugly
without the nut.