Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 97 of 200 Version:0.09
14.2.5 Read Display Power Mode (0Ah)
0AH RDDPM (Read Display Power Mode)
Inst / Para
D/C
X
RDX WRX
D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 0 0 1 0 1 0 0Ah
1
st
Parameter
1  1 x x x x x x x x x X
2
nd
Parameter
1  1 x D7 D6 D5 D4 D3 D2 D1 D0 08h
Description
This command indicates the current status of the display as described in the table below:
Bit Description Value
D7 Booster Voltage Status “1”=Booster on, “0”=Booster off
D6 Idle Mode On/Off “1”=Idle Mode On, “0”=Idle Mode Off
D5 Partial Mode On/Off “1”=Partial Mode on, “0”=Partial Mode Off
D4 Sleep In/Out “1”=Sleep Out, “0”=Sleep In
D3 Display Normal Mode On/Off “1”=Normal Display, “0”=Partial Display
D2 Display On/Off “1”=Display On, “0”=Display Off
D1 Not Defined Set to ‘0’
D0 Not Defined Set to ‘0’
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value(D7 to D0)
Power On Sequence 0000_1000(08h)
SW Reset 0000_1000(08h)
HW Reset 0000_1000(08h)
Flow Chart
command
Parameter
Display
Action
Mode
Legend
RDDPM(0Ah)
Sequential transfer
Parallel I/F Mode
RDDPM(0Ah)
Serial I/F Mode
Send D[7:0]
Dummy Read
Send D [7:0]
Host
Driver