Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 95 of 200 Version:0.09
PTLON Partial Mode On/Off “1”=On,”0”=Off
SLOUT Sleep In/Out “1”=On,”0”=Off
NORON Display Normal Mode On/Off “1”=Normal Display, “0”=Normal Display Off
VSSON Vertical Scrolling Status “1”=Scroll on,”0”=Scroll off
ST14 Horizontal Scroll Status “0”
INVON Inversion Status “1”=On, “0”=Off
ST12 All Pixels On(Not Used) “0”
ST11 All Pixels On(Not Used) “0”
DISON Display On/Off “1”=On, “0”=Off
TEON Tearing effect line on/off “1”=On, “0”=Off
GCS2 Gamma Curve Selection “000”=GC0
“001”=GC1
“010”=GC2
“011”=GC3
“100” to “111” = Not defined
GCS1
GCS
TELOM Tearing effect lin e m ode “0” =m ode 1,”1 ”=m ode 2
STO For Future Use “0”
Note: For Bits ST30 to ST28, also refer to Section 8-11
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value(ST31 to ST0)
Status
ST[31-24] ST[23-16] ST[15-8] ST[7-0]
Power On Sequence 0000-0000 0110-0001 0000-0000 0000-0000
SW Reset 0xxx-xxx0 0xxx-0001 0000-0000 0000-0000
HW Reset 0000-0000 0110-0001 0000-0000 0000-0000