Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 94 of 200 Version:0.09
14.2.4 Read Display Status (09h)
09H RDDIDIF (Read Display Identification Information)
D/CX RDX WRX
D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 0 0 1 0 0 1 09h
1
st
Parameter
1  1 x x x x x x x x x x
2
nd
Parameter
1  1 x
BOTSON
MY MX MV ML RGB MH ST24
x
3
rd
Parameter
1  1 x
ST23 IFPF2 IFPF1 IFPF0 IDMON PTLON SLOUT NORON
x
4
th
Parameter
1  1 x
VSSON ST14 INVON ST12 ST11 DISON TEON GCS2
x
5
th
Parameter
1  1 x
GCS1 GCS0 TELOM HSON VSON PCKON DEON ST0
x
Description
This command indicates the current status of the display as described in the table below:
Bit Description Value
BSTON Booster Voltage Status “1”=Booster on,”0”=Booster off
MY Row Address Order(MY) “1”=Decrement, (Bottom to Top, when MAD CTL( 36h) D7 =’1’ )
“0”=Increment, (Top to Bottom, when MADCTL(36h) D7=’0’)
MX Column Address Order(MX) “1”=Decrement, (Right to Left, when MADCTL(36h) D6=’1’)
“0”=Increment, (Left to Right, when MADCTL(36h) D6=’0’)
MV Row/Column Exchange(MV) “1”=Row/column exchange, (when MADCTL (36h) D5=’1’)
“0”=Normal (MV=0), (when MADCTL(36h)D5=’0’)
ML Vertical refresh Order(ML) “1”=Decrement, (LCD refresh Bottom to Top, when
MADCTL(36h)D4=’1’)
“0”=Increment, (LCD refresh Top to Bottom, when
MADCTL(36h)D4=’0’)
RGB RGB/BGR Order(RGB) “1”=BGR,(When MADCTL(36h)D3=’1’)
“0”=RGB,(When MADCTL(36h)D3=’0’)
MH Horizontal refresh Order(MH) “1”=Decrement, (LCD refresh Right to Left, when MADCTL(36h)
D2=’1’)
“0”=Increment, (LCD refresh Left to Right, when MADCTL(36h)
D2=’0’)
ST24 Not Used
ST23 Not Used
IFPF2
IFPF1
IFPF0
Interface Color Pixel Format
Definition
“011”=12-bit/pixel
“101”=16-bit/pixel
“110”=18-bit/pixel
IDMON Idle Mode On/Off “1”=On,”0”=Off