Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 91 of 200 Version:0.09
14.2.2 Software Reset (01h)
01H SWRESET (Software Reset)
D/CX RDX WRX D17-D8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  X 0 0 0 0 0 0 0 1 01
Parameter NO PARAMETER
Description
When the Software Reset command is written, it causes software reset. It resets the commands and parameters to their
S/W Reset default values. (See default tables in each command description.)
Note: The Frame Memory contents are affected by this command.
X = Don’t care
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence N/A
SW Reset N/A
HW Reset N/A
Flow Chart
command
Parameter
Display
Action
Mode
Legend
SW RESET
Sequential transfer
Display whole blank screen
Set Commands to S/W Default Vaule
Sleep in Mode