Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 90 of 200 Version:0.09
14.2 Command Description
14.2.1 NOP (00h)
00H NOP (No Operation)
D/CX RDX WRX D17-D8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  X 0 0 0 0 0 0 0 0 00
Parameter NO PARAMETER
Description
This command is an empty command; it does not have any effect on the display module. However it can be used to
terminate Frame Memory Write or Read as described in RAMWR (Memory Write) and RAMRD (Memory Read)
Commands.
X = Don’t care.
Restriction None
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence N/A
SW Reset N/A
HW Reset N/A
Flow Chart None