Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 79 of 200 Version:0.09
Note: There will be no output from D[7..0] and SDA during Power On/Off sequences, Hardware Reset and
Software Reset.
12.2.2 Input Pins
Input
pins
During Power On
Process
After
Power On
After Hardware
Reset
After Software
Reset
During Power Off
Process
RESX TBD Input invalid Input invalid Input invalid ?
CSX Input invalid Input invalid Input invalid Input invalid Input invalid
D/CX Input invalid Input invalid Input invalid Input invalid Input invalid
WRX Input invalid Input invalid Input invalid Input invalid Input invalid
RDX Input invalid Input invalid Input invalid Input invalid Input invalid
D17 to
D0
Input invalid Input invalid Input invalid Input invalid Input invalid
SDA Input invalid Input invalid Input invalid Input invalid Input invalid
12.3 Reset Timing
(VSS=0V, VDDI=1.65V to 1.95V, VCI=2.6V to 2.9V, Ta = -30 to 70 )
Symbol Parameter Related
Pins
MIN TYP MAX Note Unit
tRESW *1) Reset low pulse width RESX 10 - - - s
- - - 5
When reset applied
during Sleep in mode
ms
tREST *2) Reset complete width
- - - 120
When reset applied
during Sleep out mode
ms
Note
1. Spike due to an electrostatic discharge on RESX line does not cause system reset according to the table
below.