Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 78 of 200 Version:0.09
Reset Table (Default Value, GM=101, 132RGB x 132)
Item After Power
On
After Hardware
Reset
After Software Reset
Frame memory Random No Change No Change
Sleep In/Out In In In
Display In/Out Off Off Off
Display mode(normal/partial) Normal Normal Normal
Display Inversion On/Off Off Off Off
Display Idle Mode On/Off Off Off Off
Column: Start Address(XS) 0000h 0000h 0000h
Column: end Address(XE) 0083h 0083h
0083h(when MV=0)
0083h(when MV=1)
Row: Start Address(YS) 0000h 0000h 0000h
Row: End Address(YE) 0083h 0083h
0083h(when MV=0)
0083h(when MV=1)
Gamma Setting GC0 GC0 GC0
Color Set TBD TBD No Change
Partial: Start Address(PSL) 0000h 0000h 0000h
Partial: End Address(PEL) 0083h 0083h 0083h
Scroll: Vertical scrolling Off Off Off
Scroll: Top Fixed Area(TFA) 0000h 0000h 0000h
Scroll: Scroll area(VSA) 0084h 0084h 0084h
Scroll: Bottom Fixed Area (BFA) 0000h 0000h 0000h
Scroll Start Address(SSA) 0000h 0000h 0000h
Tearing: On/Off Off Off Off
Tearing Effect Mode*3 0(Mod e1) 0(Mode1) 0(Mod e1)
Memory Data Access Control
(MY/MX/MV/ML/MH/RGB)
0/0/0/0/0/0 0/0/0/0/0/0 No change
Interface Pixel Color Format 6 (18-Bit/Pixel) 6 (18-Bit/Pixel) No change
RDDPM 08h 08h 08h
RDDMADCTR 00h 00h No change
RDDCOLMOD 6 (18-Bit/Pixel) 6 (18-Bit/Pixel) No change
RDDIM 00h 00h 00h
RDDSM 00h 00h 00h
RDDSDR 00h 00h 00h
ID1 54h 54h 54h
ID2 MTP Value MTP Value MTP Value
ID3 MTP Value MTP Value MTP Value
Notes:
1. There will be no abnormal visible effects on the display when S/W or H/W Reset are applied.
2. After Powered-On Reset finishes within 10s after both VCI & VDDI are applied.
3. Mode 1 means Tearing Effect Output Line consists of V-Blanking Information only.
12.2 Input/Output Pins
12.2.1 Output Pins, I/O Pins
Output or Bi-direction pins After Power On After Hardware Reset After Software Reset
TE Low Low Low
D17to D0(Output driver) High-Z(Inactive) High-Z(Inactive) High-Z(Inactive)