Datasheet-2
a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 67 of 200
Version:0.09
10sec after both VCI and VDDI have been applied.
Note: Unless otherwise specified, timings herein show cross point at 50% of signal/power level.
9.3 Uncontrolled Power Off
The uncontrolled power off means a situation when e.g. there is removed a battery without the controlled power
off sequence. The display module must meet following requirements:
1. There cannot be any damages for the display module or the display module cannot cause any damages for
the host or lines of the interface.
2. There cannot be any abnormal visible effects (= Display must be blank) within 1 second on the display and
remains blank until “Power On Sequence” powers it up.