Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 34 of 200 Version:0.09
6.7 Display Data Transfer Mode
The data format is described for each interface. Data can be downloaded to the Frame Memory by 2 methods.
Method 1:
The Image data is sent to the Frame Memory in successive Frame writes, each time the Frame Memory is filled,
the Frame Memory pointer is reset to the start point and the next Frame is written.
Method 2:
Image Data is sent and at the end of each Frame Memory download, a command is sent to stop Frame Memory
Write. Then Start Memory Write command is sent, and a new Frame is downloaded.
Note:
1. These apply to this Data Transfer Color mode on both Serial and Parallel interfaces.
2. The Frame Memory can contain both odd and even number of pixels for both Methods. Only complete pixel
data will be stored in the Frame Memory.