Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 177 of 200 Version:0.09
14.2.56 Positive Gamma Correction Setting (E0h)
E1H Postive Gamma Correction Setting
D/CX RDX WRX D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  1 1 1 0 0 0 0 1 E0h
1
st
Parameter
1 1  x x VP63[5:0] x
2
nd
Parameter
1 1  x x VP62[5:0] x
3
rd
Parameter
1 1  x x VP61[5:0] x
4
th
Parameter
1 1  x x VP59[5:0] x
5
th
Parameter
1 1  x x VP57[5:0] x
6
th
Parameter
1 1  x x x VP50[4:0] x
7
th
Parameter
1 1  x VP43[6:0] x
8
th
Parameter
1 1  VP27[3:0] VP36[3:0] x
9
th
Parameter
1 1  x VP20[6:0] x
10
th
Parameter
1 1  x x x VP13[4:0] x
11
th
Parameter
1 1  x x VP6[5:0] x
12
th
Parameter
1 1  x x VP4[5:0] x
13
th
Parameter
1 1  x x VP2[5:0] x
14
th
Parameter
1 1  x x VP1[5:0] x
15
th
Parameter
1 1  x x VP0[5:0] x
Description
Set the gray scale voltage to adjust the gamma characteristics of the TFT panel.
It apply to gamma curve selection for only activate when EXTC=1 and GAM_R_SEL=1
VP0 is the maximum gamma output voltage in positive polarity.
VP63 is the minimum gamma output voltage in positive polarity.
Restriction -
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value
Status
1
st
~ 9
th
Parameter
Power On Sequence All ”00”
SW Reset All ”00”
HW Reset All ”00”