Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 168 of 200 Version:0.09
14.2.52 Write ID4 Value (D3h)
D3H Read the ID4 value
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 1 1 0 1 0 0 1 1 D3h
1
st
Parameter
1  1 x x x x x x x x x x
2
nd
Parameter
1  1 x ID417 ID416 ID415 ID414 ID413 ID412 ID411 ID410 91h
3
rd
Parameter
1  1 x ID427 ID426 ID425 ID424 ID423 ID422 ID421 ID420 63h
4
th
Parameter
1  1 x x x x x ID433 ID432 ID431 ID430 00h
5
th
Parameter
1  1 x x x x x x x x x x
Description
-Read the Driver IC information from mask value.
-Ignored the EXTC pin.
-The 1
st
parameter is dummy data
-The 2
nd
parameter ID41[7:0] is Driver IC ID code. (Default value=91h)
-The value be defined later
-Currently, “01h”, “02h”, “03h”, “05h” can’t be used.
-The 3
rd
parameter ID42[7:0] is Driver IC Part number ID. (The code be define by Driver IC Vendor, and default value=63h)
-The 4
th
parameter ID43[7:0] is Driver IC version ID
-When the Driver maker modifies any function it should be modify the parameters at this ID code before sample out also.
-If Driver Maker don’t need 2 parameter if can’t reduce to one parameter.
-If the parameters are not enough Driver makers can add or reduce yourself
Restriction
-
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value
Status
ID41[7:0] ID42[7:0] ID43[7:0]
Power On Sequence 01h 21h TBD
SW Reset 01h 21h TBD
HW Reset 01h 21h TBD