Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 163 of 200 Version:0.09
14.2.48 Power_Control 5 (C4h)
C4H Power_Control_5(in Partial mode/full mode)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 1 1 0 0 0 1 0 0 C4h
1
st
Parameter
1 1  x 0 0 0 0 0 APC2 APC1 APC1 01h
Description
Set the amount of current in Operational amplifier in Partial mode/full-colors
Adjust the amount of fixed current from the fixed current source in the operational amplifier for the source driver.
AP
C
[2:0]
Amount of Current in Operational Amplifier
000 0 Least
001 1 Small
010 2 Medium Low
011 3 Medium
100 4 Medium High
101 5 Large
110 6 Reserved
111 7 Reserved
Restriction If some parameter of the register not use the register need to be reserved.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value
Status
APC[2:0]
Power On Sequence 1d
SW Reset 1d
HW Reset 1d
Flow Chart
command
Parameter
Display
Action
Mode
Legend
Sequential transfer
PWCTR5(C4h)
1st Parameter: APC[2:0]