Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 162 of 200 Version:0.09
14.2.47 Power_Control 4 (C3h)
C3H Power_Control 4(in Idle mode / 8 colors)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 1 1 0 0 0 0 1 1 C3h
1
st
Parameter
1 1  x 0 0 0 0 0 APB2 APB1 APB0 00h
Description
Set the amount of current in Operational amplifier in Idle mode/8-colors
Adjust the amount of fixed current from the fixed current source in the operational amplifier for the source driver.
AP
B
[2:0]
Amount of Current in Operational Amplifier
000 0 Least
001 1 Small
010 2 Medium Low
011 3 Medium
100 4 Medium High
101 5 Large
110 6 Reserved
111 7 Reserved
Restriction If some parameter of the register not use the register need to be reserved.
Register Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value
Status
APB[2:0]
Power On Sequence 0d
SW Reset 0d
HW Reset 0d
Flow Chart
command
Parameter
Display
Action
Mode
Legend
Sequential transfer
PWCTR4(C3h)
1st Parameter: APB[2:0]