Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 160 of 200 Version:0.09
14.2.45 Power_Control2 (C1h)
C1H Power_Control 2
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 1 1 0 0 0 0 0 1 C1h
1
st
Parameter
1 1  x 0 0 0 0 0 BT2 BT1 BT0 05h
Description
Set the AVDD, VCL, VGH and VGL supply power level.
BT[2:0]
AVDD
VCL
VGH
VGL
010 2 2xVCI -1xVCI1 2.5xAVDD -2.5xAVDD
011 3 2xVCI -1xVCI1 3xAVDD -2.5xAVDD
100 4 2xVCI -1xVCI1 2.5xAVDD -3xAVDD
101 5 2xVCI -1xVCI1 3xAVDD -3xAVDD
Restriction
If this register not using the register need be reserved.
The deviation value of VGH/VGL between with Measurement and Specification
VGH-VGL <= 32V
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value
Status
BT[2:0]
Power On Sequence 7d
SW Reset 7d
HW Reset 7d
Flow Chart
command
Parameter
Display
Action
Mode
Legend
Sequential transfer
PWCTR2(C1h)
1st Parameter: BT[2:0]