Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 149 of 200 Version:0.09
14.2.39 Frame Rate Control(In Partial mode/full colors) (B3h)
B3h Frame Rate Control(In Partial mode/Full colors)
D/CX RDX WRX D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  1 0 1 1 0 0 1 1 B3h
1
st
Parameter
1
1 
x x x DIVC4 DIVC3 DIVC2 DIVC1 DIVC0 x
2
nd
Parameter
1
1 
x x VPC5 VPC4 VPC3 VPC2 VPC1 VPC0 x
Description
Sets the division ratio for internal clocks of Partial mode at CPU interface mode.
DIVB[4:0]: division ratio for internal clocks when Partial mode.
VPB[5:0]: VS porch for internal clocks when Partial mode
(1) When GM=101(132*132)
In Normal mode, line=132, Default value DIVA[4:0]=17, VPA[5:0]=20, Frame rate=62.7Hz
(2) When GM=100(130*130)
In Normal mode, line=130, Default value DIVA[4:0]=17, VPA[5:0]=20, Frame rate=63.5Hz
(3) When GM=011(128*160)
In Partial mode, line=160, Default value DIVC[4:0]=14, VPC[5:0]=20, Frame rate=61.7Hz
(4) When GM=010(120*160)
In Partial mode, line=160, Default value DIVC[4:0]=14, VPC[5:0]=20, Frame rate=61.7Hz
(5) When GM=001(128*128)
In Partial mode, line=128, Default value DIVC[4:0]=17, VPC[5:0]=20, Frame rate=64.4Hz
(6) When GM=000(132*162)
In Partial mode, line=162, Default value DIVC[4:0]=14, VPC[5:0]=20, Frame rate=61Hz
Restriction
-
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
(1) When GM=000(132*162), GM=011(128*160) or GM=010(120*160)
Default Value
Status
DIVC4:0] VPC[5:0]
Power On Sequence 0Eh/14d 14h/20d
S/W Reset 0Eh/14d 14h/20d
H/W Reset 0Eh/14d 14h/20d
(3) When GM=001(128*128), GM=100(130*130), GM=101(132*132)
Default Value
Status
DIVB[4:0] VPB[5:0]
Power On Sequence 11h/17d 11h/17d
S/W Reset 11h/17d 11h/17d
H/W Reset 11h/17d 11h/17d