Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 147 of 200 Version:0.09
14.2.38 Frame Rate Control(In Idle mode/8-colors) (B2h)
B2h Frame Rate Control(In Idle mode/Full colors)
D/CX RDX WRX D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  1 0 1 1 0 0 1 0 B2h
1
st
Parameter
1
1
 x x x DIVB4 DIVB3 DIVB2 DIVB1 DIVB0 x
2
nd
Parameter
1
1
 x x VPB5 VPB4 VPB3 VPB2 VPB1 VPB0 x
Description
Sets the division ratio for internal clocks of Idle mode at CPU interface mode.
DIVB[4:0]: division ratio for internal clocks when Idle mode.
VPB[5:0]: VS porch for internal clocks when Idle mode
)4]0:4[)(0:5[(
200
_
++
=
DIVBVPBLine
kHz
rateFrame
(1) When GM=101(132*132)
In Normal mode, line=132, Default value DIVA[4:0]=17, VPA[5:0]=20, Frame rate=62.7Hz
(2) When GM=100(130*130)
In Normal mode, line=130, Default value DIVA[4:0]=17, VPA[5:0]=20, Frame rate=63.5Hz
(3) When GM=011(128*160)
In 8-color mode, line=160, Default value DIVB[4:0]=14, VPB[5:0]=20, Frame rate=61.7Hz
(4) When GM=010(120*160)
In 8-color l mode, line=160, Default value DIVB[4:0]=14, VPB[5:0]=20, Frame rate=61.7Hz
(5) When GM=001(128*128)
In 8-color mode, line=128, Default value DIVB[4:0]=17, VPB[5:0]=20, Frame rate=64.4Hz
(6) When GM=000(132*162)
In 8-color mode, line=162, Default value DIVB[4:0]=14, VPB[5:0]=20, Frame rate=61Hz
Restriction
-
Register Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes