Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 141 of 200 Version:0.09
14.2.32 Idle Mode On (39h)
39H IDMON (Idle Mode On)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 1 1 1 0 0 1 39h
Parameter NO PARAMETER
Description
This command is used to enter into Idle mode on.
There will be no abnormal visible effect on the display mode change tranition.
In the Idle mode,
1. Color expression is reduced. The primary and the secondary colors using MSB of each R,G and B in
the Frame Memory, 8 color depth data is displayed.
2. 8-Color mode frame frequency is applied.
3. Exit from IDMON by Idle Mode Off(38h) command.
Memory Panel Display
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black 0XXXXX 0XXXXX 0XXXXX
Blue 0XXXXX 0XXXXX 1XXXXX
Red 1XXXXX 0XXXXX 0XXXXX
Magenta 1XXXXX 0XXXXX 1XXXXX
Green 0XXXXX 1XXXXX 0XXXXX
Cyan 0XXXXX 1XXXXX 1XXXXX
Yellow 1XXXXX 1XXXXX 0XXXXX
White 1XXXXX 1XXXXX 1XXXXX
Restriction
This command has no effect when module is already in idle on mode.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence Idle Mode Off
SW Reset Idle Mode Off
Flow Chart