Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 132 of 200 Version:0.09
14.2.27 Tearing Effect Line Off (34h)
34H TEOFF (Tearing Effect Line OFF)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 1 1 0 1 0 0 34h
Parameter NO PARAMETER
Description
This command is used to turn OFF (Active Low) the Tearing Effect output signal from the TE signal line.
Restriction
This command has no effect when Tearing Effect output is already OFF.
Register Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence OFF
SW Reset OFF
HW Reset OFF
Flow Chart
command
Parameter
Display
Action
Mode
Legend
Sequential transfer
TE Line Output ON
TEOFF(34h)
TE Line Output OFF