Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 128 of 200 Version:0.09
Restriction
The condition is (TFA+VSA+BFA)=128 in 128RGBx128 (GM=”001”)
The condition is (TFA+VSA+BFA)=130 in 130RGBx130 (GM=”100”)
The condition is (TFA+VSA+BFA)=132 in 132RGBx132 (GM=”101”)
The condition is (TFA+VSA+BFA)=160 in 128RGBx160 (GM=”011”) or 120RGBx160(GM=”010”)
The condition is (TFA+VSA+BFA)=162 in 132RGBx162(GM=”000”)
Otherwise Scrolling mode is undefined.
In Vertical Scroll Mode, MADCTL parameter MV should be set to ‘0’ – this affects the Frame memory Write.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value Status
TFA[15:0] VSA[15:0] BFA[15:0]
GM “xx” “101” “100” “011” “010” “001” “000” “xx”
Power On Sequence 0000h 0083h 0081h 00A0h 00A0h 0080h 00A2h 0000h
SW Reset 0000h 0083h 0081h 00A0h 00A0h 0080h 00A2h 0000h
HW Reset 0000h 0083h 0081h 00A0h 00A0h 0080h 00A2h 0000h
Flow Chart 1. To enter Vertical Scroll Mode: