Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 126 of 200 Version:0.09
End Row
Start Row
Non-Display Area
Partial
Area
Partial
Area
PSL[15:0]
PEL[15:0]
If End Row = Start Row then the Partial Area will be one row deep.
Restriction
-
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Default Value Status
PSL[15:0] PEL[15:0]
GM “xxx” “101” “100” “011” “010” “001” “000”
Power On Sequence 0000h 0083h 0081h 009Fh 009Fh 007Fh 00A1h
SW Reset 0000h 0083h 0081h 009Fh 009Fh 007Fh 00A1h
HW Reset 0000h 0083h 0081h 009Fh 009Fh 007Fh 00A1h
Flow Chart
PTLAR(30h)
command
Parameter
Display
Action
Mode
Legend
Sequential transfer
PTLON(12h)
1st & 2nd Parameter
PSL[15:0]
3rd & 4th Parameter
PEL[15:0]
Partial Mode
1. To Enter partial Mode
DISPOFF(28h)
Image Data
D1[17:0],D2[17:0]..Dn[17:0]
RAMRW(2Ch)
2. To Exit Partial Mode
Partial Mode
NORON(13h)
Partial Mode OFF
DISPON(29h)
Optional to prevent
Tearing Effect
Image Display