Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 125 of 200 Version:0.09
14.2.25 Partial Area (30h)
30H PLTAR (Partial Area)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 1 1 0 0 0 0 30h
1
st
Parameter
1 1  x PSL15 PSL14 PSL13 PSL12 PSL11 PSL10 PSL9 PSL8 -
2
nd
Parameter
1 1  x PSL7 PSL6 PSL5 PSL4 PSL3 PSL2 PSL1 PSL0 -
3
rd
Parameter
1 1  x PEL15 PEL14 PEL13 PEL12 PEL11 PEL10 PEL9 PEL8 -
4
th
Parameter
1 1  x PEL7 PEL6 PEL5 PEL4 PEL3 PEL2 PEL1 PEL0 -
Description
This command defines the partial mode’s display area. There are 4 parameters associated with this command, the first
defines the Start Row (PSL) and the second the End Row (PEL), as illustrated in the figures below. PSL and PEL refer to
the Frame Memory Line Pointer.
If End Row>Start Row when MADCTL B4=0:
PSL[15:0]
Start Row
End Row
Partial
Area
PEL[15:0]
Non-Display Area
Non-Display Area
If End Row > Start Row when MADCTL ML=1:
Start Row
End Row
Partial
Area
PEL[15:0]
PSL[15:0]
Non-Display Area
Non-Display Area
If End Row < Start Row when MADCTL ML=0:
Partial
Area
End Row
Start Row
PSL[15:0]
Non-Display Area
Partial
Area
PEL[15:0]
If End Row < Start Row when MADCTL ML=1: