Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 108 of 200 Version:0.09
14.2.15 Display Inversion Off (20h)
20H PTLON (Partial Mode On)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 1 0 0 0 0 0 20h
Parameter No Parameter
Description
This command is used to recover from display inversion mode.
This command makes no change of contents of frame memory.
This command does not change any other status.
Memory Display Panel
X = don’t care
Restriction This command has no effect when module is already in inversion off mode.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence Normal Display Mode Off
SW Reset Normal Display Mode Off
HW Reset Normal Display Mode Off
Flow Chart
command
Parameter
Display
Action
Mode
Legend
Sequential transfer
INVOFF(20h)
Display Inversion Off Mode
Display Inversion On Mode