Datasheet-2
a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 107 of 200
Version:0.09
14.2.14 Normal Display Mode On (13h)
13H PTLON (Partial Mode On)
D/CX RDX WRX D17-8 D7
D6
D5
D4
D3
D2
D1
D0
HEX
Command 0 1 x 0 0 0 1 0 0 1 1 13h
Parameter No Parameter
Description
This command returns the display to normal mode.
Normal display mode on means Partial mode off and Scroll mode Off.
Exit from NORON by the Partial mode On command(12h)
X = Don’t care
Note: If a command is written in a frame cycle, the command becomes effective from the next frame.
Restriction This command has no effect when Normal Display mode is active.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out
Yes
Normal Mode On, Idle Mode On, Sleep Out
Yes
Partial Mode On, Idle Mode Off, Sleep Out
Yes
Partial Mode On, Idle Mode On, Sleep Out
Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence Normal Display Mode On
SW Reset Normal Display Mode On
HW Reset Normal Display Mode On
Flow Chart See Partial Area and Vertical Scrolling Definition Descriptions for details of when to use this command.