Datasheet-2
a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 106 of 200
Version:0.09
14.2.13 Partial Mode On (12h)
12H PTLON (Partial Mode On)
D/CX RDX WRX
D17-8 D7
D6
D5
D4
D3
D2
D1
D0
HEX
Command 0 1 x 0 0 0 1 0 0 1 0 12h
Parameter No Parameter
Description
This command turns on partial mode. The partial mode is described by the Partial Area command (30h).
To leave Partial mode, the Normal Display On command (13h) should be written.
X = Don’t care
Note: If a command is written in a frame cycle, the command becomes effective from the next frame.
Restriction This command has no effect during Partial mode is active.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out
Yes
Normal Mode On, Idle Mode On, Sleep Out
Yes
Partial Mode On, Idle Mode Off, Sleep Out
Yes
Partial Mode On, Idle Mode On, Sleep Out
Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence Normal Display Mode On
SW Reset Normal Display Mode On
HW Reset Normal Display Mode On
Flow Chart See Partial Area (30h)