Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 102 of 200 Version:0.09
14.2.10 Read Display Signal Mode (0Fh)
0EH RDDSM (Read Display Signal Mode)
D/C
X
RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 0 0 1 1 1 1 0Fh
1
st
Parameter
1  1 x x x x x x x x x x
2
nd
Parameter
1  1 x D7 D6 D5 D4 D3 D2 D1 D0 00h
Description
This command indicates the current status of the display as described in the table below:
Bit Description Value
D7 Register Loading Detection
D6 Functionality Detection
D5 Not Used “0”
D4 Not Used “0”
D3 Not Used “0”
D2 Not Used “0”
D1 Not Used “0”
D0 Not Used “0”
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value(D7 to D0)
Power On Sequence 0000_0000(00h)
SW Reset 0000_0000(00h)
Flow Chart
command
Parameter
Display
Action
Mode
Legend
RDDPM(0Fh)
Sequential transfer
Parallel I/F Mode
RDDID(0Fh)
Serial I/F Mode
Send 2nd
Parameter
Dummy Read
Send 2nd
Parameter
Host
Driver