Datasheet-2

a-Si TFT LCD Single Chip Driver
132RGBx162 Resolution and 262K color
ILI9163C
Page 101 of 200 Version:0.09
14.2.9 Read Display Signal Mode (0Eh)
0EH RDDSM (Read Display Signal Mode)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1  x 0 0 0 0 1 1 1 0 0Eh
1
st
Parameter
1  1 x x x x x x x x x x
2
nd
Parameter
1  1 x D7 D6 D5 D4 D3 D2 D1 D0 00h
Description
This command indicates the current status of the display as described in the table below:
Bit Description Value
D7 Tearing Effect Line On/Off “1”=On, “0”=Off
D6 Tearing Effect Line Mode “0”=mode1, “1”=mode2
D5 Horizontal Sync. (RGB I/F) On / Off “1”=On, “0”=Off
D4 Vertical Sync. (RGB I/F) On / Off “1”=On, “0”=Off
D3 Pixel Clock (PCLK, RGB I/F) On / Off “1”=On, “0”=Off
D2 Data Enable (DE , RGB I/F) On / Off “1”=On, “0”=Off
D1 Not Used
D0 Not Used
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value(D7 to D0)
Power On Sequence 0000_0000(00h)
SW Reset 0000_0000(00h)
Flow Chart
command
Parameter
Display
Action
Mode
Legend
RDDPM(0Eh)
Sequential transfer
Parallel I/F Mode
RDDID(0Eh)
Serial I/F Mode
Send D[7:0]
Dummy Read
Send D [7:0]
Host
Driver