Datasheet

UHF MAGICSTRAP

Data Sheet

LXMSJZNCMF-198

Rev1.1 Oct, 2017

NOTICE

1. Storage Conditions:

To avoid damaging, be sure to observe the following points.

- Store products where the ambient temperature is 15 to 35 °C and humidity 45 to 75% RH.

(Packing materials, In particular, may be deformed at the temperature over 40 °C.).

- Store products in non corrosive gas (Cl

, NH

,SO

, No

, etc.).

- Stored products should be used within 6 months of receipt.

This product is applicable to MSL1 (Based on IPC/JEDEC J-STD-020)

2. Handling Conditions:

Be careful in handling or transporting products because excessive stress or mechanical shock

may break products due to the nature of ceramics structure.

3. Cleaning Conditions:

Any cleaning is not permitted..

4. Operational Environment Conditions:

Products are designed to work for electronic products under normal environmental conditions

(ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the

similar conditions to the above-mentioned. However, if products are used under the following circumstances, it

may damage products and leakage of electricity and abnormal temperature may occur.

- In an atmosphere containing corrosive gas ( Cl

etc.).

- In an atmosphere containing combustible and volatile gases.

- In a dusty environment.

- Direct sunlight

- Water splashing place.

- Humid place where water condenses.

- In a freezing environment.

If there are possibilities for products to be used under the preceding clause, consult with Murata

before actual use.

If product malfunctions may result in serious damage, including that to human life,

sufficient fail-safe measures must be taken, including the following:

(1) Installation of protection circuits or other protective device to improve system safety

(2) Installation of redundant circuits in the case of single-circuit failure